Search Results
| Search type | Search syntax |
|---|---|
| Tags | [tag] |
| Exact | "words here" |
| Author |
user:1234 user:me (yours) |
| Score |
score:3 (3+) score:0 (none) |
| Answers |
answers:3 (3+) answers:0 (none) isaccepted:yes hasaccepted:no inquestion:1234 |
| Views | views:250 |
| Code | code:"if (foo != bar)" |
| Sections |
title:apples body:"apples oranges" |
| URL | url:"*.example.com" |
| Saves | in:saves |
| Status |
closed:yes duplicate:no migrated:no wiki:no |
| Types |
is:question is:answer |
| Exclude |
-[tag] -apples |
| For more details on advanced search visit our help page | |
Results tagged with router
Search options answers only
not deleted
user 272
Routers and bits, features, techniques, safety etc.
3
votes
Wood splinters when using a rabbeting bit
How much grain break-out or splitting you get is a function of several factors:
Sharpness of the router bit
Rotation speed of cutter
Feed speed
Depth of cut
Cutter geometry (straight-fluted, upcut spiral … Practically, what this means is, once you've got a decent bit and whacked the RPM up on your router, play around with the depth/width of cut until you find something that works. …
- 3,948
1
vote
What router bit type should I use on screws?
If the screws (or remnants of screws) come loose at all during machining then you're going ruin the router bit, probably ruin the workpiece, and have a dangerous chunk of metal flying at you at high speed …
- 3,948
2
votes
Accepted
What are these holes in the router base plate for?
It can also allow you to fix the router into a "router table" setup or similar. Basically any time you want to fix something to your baseplate or attach your router to some fixture. … In this way you can often make jigs and attachments which were made for (for example) a Makita router work with a Bosch router and so on. …
- 3,948
3
votes
Accepted
Cut-out from 18mm MDF
It's exactly the job for a router. … run with the router base directly on the surface of the MDF but you might run into trouble with the router tilting if you're not careful. …
- 3,948
0
votes
CNC Router square internal corners
You're correct in that you can't easily cut a square internal corner just with a router (technically it can be done with a 5-axis CNC router, a taper bit, and some clever programming) - but do you really …
- 3,948
2
votes
Accepted
Trim router - Arbor has small amount of play along its axis, is this normal? (DWP611)
Every time you over-stress your router (even if it's just hearing the motor slow down because you're pushing at a feed rate which is too high) you risk bending the spindle or otherwise putting something …
- 3,948
21
votes
Accepted
When should I use a spiral router bit?
Downcut and upcut bits generally give a better cut and are easier to use when working with a handheld/manual-feed router. … Consequently you get less "chatter" of the router during use. …
- 3,948
1
vote
Can I use a plungable router bit on a drill press?
This is all because router bits rely on high RPMs to clear chips and dust out of the hole being routed, whereas when you're drilling at a few hundred to a few thousand RPM, the debris won't clear. …
- 3,948
1
vote
Does HDF require different circular saw blades and routing bits to cut cleanly?
Carbide or diamond cutters are best, but carbide (and probably even diamond cutters) will still generally leave a "fluffy" edge which requires sanding and sealing.
Be aware that even with carbide cutt …
- 3,948
5
votes
Should I do many shallow quick cuts or a single deep slow one with my router?
If you use a single, deep pass (even with a slow "feed rate", that is the rate of travel of your router), due partially because of chip clearance problems and partially just because the bit will have a … This'll be lessened by using a spiral-cut router bit rather than a straight-fluted one, and also by taking shallower passes. …
- 3,948