I used to plane the edges of the wood strips I cut using a hand plane, but I've got a new benchtop power jointer and wanted to use it as it would be much easier and accurate.

I am in the process of creating some cutting boards and wanted to use the small jointer I have to straighten up the edges of the strips I cut. I dont think it will be an issue doing it for the first set of cuts as I can plan with the grain.

My questions are:

• Would the edge jointing go smooth across the grain, which is the resulting strips after the second set of cuts? I used to do the same with the hand plane and didn't have issues there.

• Would you use a jointer on end grain?