Timeline for How can I increase the resistance in an adjustable scissor-lift?
Current License: CC BY-SA 4.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 22, 2023 at 7:35 | history | edited | Graphus |
edited tags
|
|
| Aug 21, 2023 at 12:09 | history | edited | FreeMan | CC BY-SA 4.0 |
edited title
|
| Aug 20, 2023 at 8:36 | vote | accept | Josip | ||
| Aug 17, 2023 at 15:48 | history | edited | Graphus | CC BY-SA 4.0 |
added 6 characters in body; edited title
|
| Aug 17, 2023 at 15:16 | answer | added | Graphus | timeline score: 0 | |
| Aug 17, 2023 at 6:43 | comment | added | Josip | Thank you for the tips. I forgot to mention, removing the bottom backing plank that connects the legs and replacing it with a slightly longer one to compensate for the widths of the washers or other material is not a problem, although I'd rather not have to do that. | |
| Aug 16, 2023 at 16:58 | comment | added | Graphus | Hi, welcome to StackExchange. First off, well done on the build. You do need to have some concern about the tightening of the nuts causing the washers to sink in, but there is a limit to how far this will go and eventually the wood will reach the maximum limit for how much it can be compressed and things will settle down. I think the simplest way to increase friction (other than just tightening more) is to insert rubber or other washers in between the elements IF there's space, but it doesn't look like there is unfortunately. | |
| S Aug 16, 2023 at 11:28 | review | First questions | |||
| Aug 16, 2023 at 20:27 | |||||
| S Aug 16, 2023 at 11:28 | history | asked | Josip | CC BY-SA 4.0 |