Skip to main content
Woodworking

Return to Question

Add turning tag fixup flow
Source Link
user5572
user5572

I made a pepper mill. theThe top is not concentric with the bottom. How do I correct this?

The mill is rough turned to 2 3/8 inch diameter. II drilled the hole for the body first, then parted the top and drilled the top for the shaft. WhenWhen I put the top tenon into the bottom hole there is no play, but the tenon top is not concentric with the bottom hole. Is

Is it possible to fix this.?

I made a pepper mill. the top is not concentric with the bottom. How do I correct this?

The mill is rough turned to 2 3/8 inch diameter. I drilled the hole for the body first, then parted the top and drilled the top for the shaft. When I put the top tenon into the bottom hole there is no play, but the tenon top is not concentric with the bottom hole. Is it possible to fix this.

I made a pepper mill. The top is not concentric with the bottom. How do I correct this?

The mill is rough turned to 2 3/8 inch diameter. I drilled the hole for the body first, then parted the top and drilled the top for the shaft. When I put the top tenon into the bottom hole there is no play but the tenon top is not concentric with the bottom hole.

Is it possible to fix this?

Add turning tag
Link
edit approved Jun 24, 2021 at 20:01
Brian McCutchon
edit approved Jun 24, 2021 at 20:01
Brian McCutchon
  • 137
  • 1
  • 6
Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
Source Link
Ron
Ron
  • 1
  • 1

I made a pepper mill. the top is not concentric with the bottom. How do I correct this?

The mill is rough turned to 2 3/8 inch diameter. I drilled the hole for the body first, then parted the top and drilled the top for the shaft. When I put the top tenon into the bottom hole there is no play, but the tenon top is not concentric with the bottom hole. Is it possible to fix this.