rob's user avatar
rob's user avatar
rob's user avatar
rob
Moderator
  • Member for 7 years, 8 months
  • Last seen more than a week ago
57 votes
Accepted

What advantages does a dust collector have over a shop vac?

29 votes

In what cases is it useful to have more than one of the same tool?

23 votes

Is a climbing cut on a table-saw ever justified?

23 votes

How do I prevent dangerous kickback on a table saw?

21 votes
Accepted

What can I coat a wooden drawer slide with to reduce drag?

21 votes
Accepted

Is PVC pipe safe to use for a dust collection system?

19 votes
Accepted

What is a planer sled and how do you use it?

18 votes
Accepted

What is the difference between full overlay and half overlay hinges?

17 votes
Accepted

What is a crosscut sled used for?

16 votes
Accepted

What is a good way to prevent jointed tabletops from bowing when tightening fasteners or the glue sets?

16 votes

What can I do to eliminate drift when cutting with my bandsaw?

16 votes
Accepted

Why and when should I wear a dust mask?

15 votes
Accepted

What are the jointer-specific steps for removing warp in lumber?

15 votes
Accepted

What kind of wood dust is toxic/dangerous and requires usage of dust mask?

15 votes
Accepted

How to straighten a warped board

15 votes

How can I attach a solid table top to perpendicular cross rails?

15 votes

How can I properly dispose of rags used with Boiled Linseed Oil

14 votes
Accepted

Should I do many shallow quick cuts or a single deep slow one with my router?

14 votes
Accepted

Are there any alternatives to a SawStop?

13 votes

How do I calculate the weight threshold for plywood boxes/cabinet carcasses?

13 votes

How do I accurately cut a board exactly in half?

13 votes

Best method for drilling a larger diameter hole at an angle

13 votes

How can I safely move complete 4 ft x 8 ft sheets of plywood alone?

13 votes

What is the hook angle on a saw blade?

13 votes
Accepted

How are seamless, inset secret compartments created?

13 votes
Accepted

What kind of wax will keep a crosscut sled sliding well?

13 votes
Accepted

What's a good way to cut a board parallel to its face?

13 votes

What is a try square used for?

12 votes
Accepted

What types of table saw cuts cannot be made with a riving knife installed?

12 votes
Accepted

What is wood stabilization?

1
2 3 4 5
7