William Hird
  • Member for 6 years, 9 months
  • Last seen more than 1 year ago
Accurately cutting large (4x8) stock to size
3 votes

More of a general comment than an answer: if you are going to use large (4x8) pieces for a project such as the melamine laminate,buy and get the piece cut at Home Depot or a store with a panel cutter, ...

View answer
How can I cut plywood in a straight line on a smaller table saw freehand?
2 votes

Get yourself an 8ft. level from Home Depot, Lowes,ect and clamp it to the plywood and use it as a straitedge (guide) for your circular saw. These levels are precision milled at the factory, you can ...

View answer
Dealing with knots "bleeding" through paint
1 votes

The only method I have found that works 100% to hide these stains is to use a two part epoxy marine paint as your primer. Reason being that two part epoxies cure by chemical cross-linking as opposed ...

View answer
How to repair missing chunk of wood from cabinet door?
1 votes

A technique I like using which can be applied to several problems such as yours is to fill the chipped-out area with Bondo(as in autobody filler). If the chip out is shallow I like to drill little 1/8 ...

View answer