Tag Info

You would use this type of adapter which you can obtain from any of the big box stores in the shop vac department. This adapter kit handles 2 1/2, 1 7/8, and 1/1/4 hoses. This link for adapter ...

You definitely do not want to decrease your hose size as you get closer to the dust collector/vacuum. Just about every shop I have worked in has had confusion over dust collection piping, usually ...

Thanks to some of the comments I figured out the solution. I was thinking about this wrong! I was looking for a hard plastic adapter that would go right on the dust port of the table saw. After ...

According to the makers website: Designed with industry-standard vacuums in mind, the Quick Click Separator connects easily to a wide range of wet-dry vacuums, including popular brands like Rigid, ...

Generally, folks use 2.5" hose for shop vacuums, which work at a high pressure differential but low volume, and 4" hose for dust collectors, which are designed to move more air but usually operate at ...

Do proper shop vacs/dust collectors eject much air? Yes. All the air that a dust collector or shop vac sucks in, which is a lot, has to come out somewhere. Exactly how the air is returned varies. ...

ABS fittings will also do the trick. Parts needed are: 1 1/2 hub x hub coupling 1 1/2 - 1 1/4 spigot x slip joint trap adapter Painters tape (optional) See picture.