3

I procrastinated this for quite a while but ended up going a completely different direction from what I was thinking initially. Couldn't find an elegant way to connect the legs with the original style so I flushed up the ends of the table, then made 2 legs from ripping the original 4 in half and joining them together. I then connected it to the table by ...


2

To maintain current size there are few options. The existing system we must guess was good enough when the table was new. Perhaps screws got loose and were not tightened? And the pocket screws appear to be short! Because the legs are so thick these screws could be double previous length I think. Deepen pilot holes if you add longer screws. Unless corner ...


1

Corner braces like these are a very common way to attach legs. They're attractive for commercial furniture because they create a strong joint that's easy to assemble and disassemble, so you can ship the table with the legs removed. You can buy commercially-made metal ones like the ones in the picture, or make your own with pieces of wood glued and screwed at ...


Only top voted, non community-wiki answers of a minimum length are eligible