I would link to build a drawer similar to the picture below. I already have a panel-style door which is ~ 560 x 780mm with solid 20mm maple as stiles and rails. 

I will be pulling this drawer ~ 20 times per day, 600 times per month, and 7000+ per year. 

In the picture below, (taken from https://www.ovisonline.com/Rev-A-Motion-Single-50-Qt-Trash-Can-P493.aspx) it looks like the drawer is about 1/5 of the front. 

Is this enough?

My concern is having a small drawer and the handle on the top, the force will be unevenly distributed, and eventually, the front be tilted forward and the screws coming loose. 

I do understand no one has a clear answer without testing out, but my intuition from the picture 1/5 looks too little, and would like to hear if anyone has experience or thoughts. 

[![enter image description here][1]][1]


  [1]: https://i.sstatic.net/xSqeC.png