Questions tagged [paint]

Characteristics and application of opaque finishes.

Filter by
Sorted by
Tagged with
2
votes
1answer
60 views

Stop my drawers from blocking caused by a layer of paint

I built a wooden cupboard with drawers. When the woodworking was finished, the drawers could be pulled out smoothly but I then applied stain onto the drawers and the cupboard, which now makes the ...
1
vote
1answer
78 views

How to get this colour in pine?

any idea how this color can be achieved? Both the body and top, which seems to be different On top I believe is some sort of black wenge diluted, but the other one im not sure if it is grey and wiped ...
0
votes
3answers
93 views

DIY “white wash” from thinning latex interior paint?

I'm looking to paint a red oak commission piece and the client asked about a "white wash" type finish instead of purely opaque white paint such that the grain shows through. I was wondering if there ...
1
vote
2answers
53 views

I accidentally removed some paint from my child's toy with surgical spirits while disinfecting it, what went wrong?

So during the coronavirus pandemic I have been spraying any package contents I receive with 80% surgical spirit if it is plastic and nonedible. Today my daughter received a couple of new toys in the ...
0
votes
0answers
17 views

Not woodworking, but..need a washable sealant that won't absorb grease to be applied over a painted wall

I have painted a scene on the wall behind my kitchen stove. Now I need to protect the paint to that it 1) doesn't absorb cooking spatters and 2) is washable for the cooking spatters that do land on it ...
4
votes
1answer
252 views

How to find replacement body paint for Record #07 handplane

Question I'm restoring a Record #07 hand plane (see Images section below). I plan to use electrolysis to clean the rust out of the nooks and crannies, and I suspect doing so might also attack the ...
1
vote
1answer
164 views

Getting pine to look like this

I have some retro style furniture made out of pine, and need to get it to the color of the table in the picture. At first glance, it looks like some kind of oil over varnish, but can't figure it out. ...
0
votes
1answer
67 views

Lacquer/polyurethane over paint?

I am painting cabinet doors using Dulux waterbased satinwood. It does seem to remain in a state where things touching it tend to stick. I have found this to be the case on other doors even after many ...
0
votes
1answer
58 views

Painting cabinet doors

I'm going to paint my MDF kitchen cabinet doors and want a professional finish. I'm testing on some MDF offcuts to perfect the finish. I have used a paint sprayer using Dulux satinwood, finish does ...
2
votes
1answer
144 views

Difficulty level in restoring wood bench?

For a while I've been looking for someone to restore the furniture in the picture. Without the caning, the cheapest I found was $350. They would take the furniture apart, sand and repaint, and then ...
1
vote
0answers
39 views

Durable clear finish over lettering on natural background

I am making a skittles board with b2 birch plywood. For those that don't know, this is not a candy server - it is a tabletop game somewhat like a combination of bowling, shuffleboard and top spinning....
0
votes
1answer
59 views

Removing Spilled Paint and Staining Table

A clumsy contractor put a paint can on a table of mine (no stain, varnish, 100% fresh wood) and a ring of paint got left behind on the table. What is the best way to remove the paint so that I can ...
2
votes
1answer
55 views

Does water-based polyurethane affect paint color?

I recently painted a dresser. I originally painted it a darker gray than I wanted so after putting the initial two coats on I took the paint back to Home Depot and had them lighten the rest of the ...
1
vote
1answer
115 views

Refinishing an “antique” storm door

I recognize that this may be more appropriate for DIY, but what I'm doing hies pretty closely to classic woodworking, so let's give it a try. I've read a few Q&A related to refinishing wooden ...
6
votes
1answer
1k views

Remove white paint from old wood fence

I used some reclaimed wood from a ~12 year old fence to build the top of a farm table. The paint on the fence is white, faded, and powdery. If you pick up a board it dusts up your hands a lot. What ...
1
vote
1answer
54 views

Painted board coated with shellac

My painted board has 2 coats of shellac & has dried for 2 days. But when I place a piece of décor on it, it leaves a mark.
1
vote
0answers
123 views

Do I need to use epoxy primer on fiberglass/epoxy before painting?

I am building a stitch&glue plywood boat that is coated with fiberglass and epoxy on the outside. I am trying to determine whenever I need to add epoxy primer on top of the epoxy coat before ...
2
votes
1answer
62 views

How to be confirm removal of glue residues?

I have some loudspeakers with the front panel made of MDF, on which a matte plastic foil was attached. After 15 years the glue is ineffective and the plastic shrunk, so I would like to remove it ...
2
votes
1answer
87 views

Painting the edges of a cutout (inner and outer edges)

Is there a special technique that anyone can recommend for painting inner and outer edges of a cutout (say, from a jigsaw or something). I've thrown together an example in Tinkercad: I'm planning on ...
3
votes
1answer
1k views

Finish for hand painted/lettered wood sign

I've just started cutting, sanding, and staining premium pine craft wood from Lowe's to make my hand painted signs. I do hand lettering and use water based acrylic paint pens and sometimes gel pens. I ...
0
votes
2answers
103 views

Type of wood for chunky puzzle

As a novice in woodworking, I am looking for some advice concerning a project I have in mind. I would like to create something similar to a chunky puzzle, something that looks like this, with much ...
4
votes
1answer
3k views

Drill holes for bookshelves before or after paint?

I am building a set of built in bookshelves with floating shelves set on pins. The bookshelves will be painted, so I'm assuming 1 coat of primer and 2 coats of finish. Should I drill the holes for ...
4
votes
1answer
2k views

Longterm protection for outdoor painted bird feeder (bird safe & environmentally friendly)?

I'm custom building some bird feeders which will be sold for a charity. They need to be safe for birds, look decent for a while, preferably be environmentally friendly. 1) What are my options for ...
2
votes
1answer
3k views

Linseed oil finish over spraypaint

I'm want to paint my project with a very light coat of spraypaint, without grain filler so that the wood grain is still visible. I've seen a linseed oil finish on bare wood, and after 10 or 15 thin ...
1
vote
1answer
341 views

Removing spots of tempera paint from rough sawn cedar board ceiling

I've read the thread on removing paint from rough sawn wood but it doesn't exactly address my situation. My daughter painted some designs on the ceiling of her room with some kind of tempera-based (I ...
2
votes
1answer
2k views

How do I prevent knots in a pine wood bead board panel from bleeding through paint?

I want to paint a knotty pine panel and saw a recommendation to use two-part epoxy marine paint as primer so the knots would not bleed though the paint as few years later. Do I use the marine primer ...
2
votes
0answers
581 views

Painting & finishing Baltic Birch [duplicate]

I've started a DIY speaker project based on some components from PureAudioProjects. So far, I have fabricated modular speaker baffles from Baltic Birch (they attach to a frame, albeit a bit different ...
5
votes
2answers
2k views

Making removable marks on walls for e.g. cabinet installation

I'm building and installing various cabinets and shelving units around the house, and when it's time to install them, knowing the exact stud and cross-bracing locations is very helpful. I have an ...
1
vote
0answers
105 views

How would you create a high gloss finish on furniture? [duplicate]

From a smooth lacquered finish like this: To a high gloss like this: How would I get create a finish like the picture above when starting with a smooth lacquer finished piece of furniture (i.e. IKEA ...
4
votes
1answer
2k views

Painting a kid's bed frame

I'm going to be building a bed frame for my daughter and would like to paint it. I want the finish to be durable (no chipping, and be able take some abuse from toys being hit against it), so am ...
14
votes
2answers
691 views

How do I properly care for my paintbrushes?

I have been diligently cleaning my paintbrushes after use by rinsing them in the recommended solvent (in this case mineral turpentine). Nonetheless, this last time my paintbrush hardened into a solid ...
1
vote
1answer
2k views

Can I salvage a paint brush with dried polyurethane on the bristles? [duplicate]

I bought a nice Wooster Pro nylon brush to use for applying water-based polyurethane to some projects. After the last application, I forgot to wash the brush and it has since dried and hardened. I can ...
1
vote
1answer
395 views

How do I fix a new douglas fir tongue and groove exterior floor that is oozing sap?

I've just had installed a new Douglas Fir tongue and groove porch floor - the porch is covered but will still get some rain. The flooring already has two coats of Woodlife Classic and I will be ...
3
votes
1answer
332 views

Should I use solid color wood stain or paint for my project?

I know questions based on opinion are not too welcomed here and I'm trying to avoid making this look like one. My situation is this: I'm building a piece of outdoor patio furniture. For part of that ...
3
votes
1answer
74 views

Do I need to sand, condition, prime etc and what paint and stain is best to finish my Armoire?

I am new to woodworking and paint finishes and have been trying to find the most cost- and time-effective way to redo this piece but also give stunning results. It has a yellowed pine finish and I am ...
2
votes
1answer
98 views

Identifying Paint Type on Finished Furniture

I recently acquired a wooden table with a high-gloss painted surface. In moving it, I scratched one edge. I am hoping to repair the damage (hopefully without repainting the whole table) and then ...
8
votes
3answers
257 views

What do I need to know before I lacquer a custom painted guitar body?

I have a stratocaster body that a friend of mine has painted, I know I need to lacquer it before I do anything else, like sorting out the electrics etc. I'm just unsure what lacquer to use so that I ...
4
votes
1answer
205 views

Painting a built in bookcase?

I'm building a large built-in bookcase system for a home office (floor to ceiling). The bookcase is black walnut plywood with poplar trim and a 1/8" tempered hardboard backing. Bookcase will be ...
5
votes
1answer
8k views

How to make a small repair to a piano?

I droped a small lamp in a piano and the corner got chipped. I need to fill the hole and give it the same black satin look. How can I make this repair?
2
votes
5answers
2k views

When it comes to removing multiple layers of paint from a flat surface what are my options?

I am going to be getting some old bookshelves that are likely made from 2x10 pine. I really want to use those for building a workbench top. So I am going to be cutting them up. Since they were ...
6
votes
3answers
77k views

Long term, what happens if I paint wet wood?

If I paint wood, for outdoor use, while it is still very wet, what problems can I expect in the long run (2-3 years)? In my specific case, I have pressure treated outdoor lumber (fir), which I ...
4
votes
3answers
310 views

Painting dark MDF Cabinet White

I'm trying to decide if my wife and I should buy some furniture new or buy an old piece and repaint it. It's basically a large dresser + hutch (made of MDF) and is currently dark brown (we want to ...
6
votes
2answers
6k views

Removing Paint from Rough/Coarse Surfaced Beams

We are about to move into a new house, that has some very nice coarse/rough beams on the interior (A lot of them). They have been painted though, and I'm looking for a method to remove the paint, and ...
5
votes
2answers
1k views

Removing silicone lubricant spray from painted timber finished with water-based paint

I make windows and doors, and a great way to make sure that they open and close smoothly is to use silicone lubricant spray on the rubber weatherseals. While silicone lube is fine to use on painted ...
4
votes
3answers
70 views

What type of paint would be suitable in terms of durability?

I'm looking for a type of paint that I can use on a small children's desk. The desk is a simple round design with 4 legs. I would like to use a paint that can take a beating. I was thinking of using ...
4
votes
1answer
184 views

How can I create a wood-like pattern in white-painted furniture?

I have some furniture painted in white. I would now like to paint, on top of the current color, a wooden like pattern. Which technique can I use to achieve this?
2
votes
1answer
129 views

How to achieve a nice wooden like pattern with a white wash look?

I have some old furniture that I recovered a while ago. It had some missing parts (holes, etc) that I filled with white repair product. I than painted it solid white. I now want to change it. I ...
9
votes
1answer
2k views

Will painting the edges of plywood hide the layers?

If I paint the edges of an oak plywood sheet, will it hide the layers well enough to not show through the paint?
3
votes
1answer
174 views

Finish after using chalk paint

I am making a pallet style table. I am going to be using home made chalk paint that is a mixture of latex and drywall mud/compound. Now, on the advice on several websites and my friend you cannot ...
13
votes
2answers
42k views

Which solvents can be stored in which plastics? — is there an organic chemist in the house?

Now that coffee cans, and even larger glass bottles, are becoming hard to find, my workshop's pile of containers is mostly plastic. This has me wondering/worrying about which plastics might be ...