Questions tagged [finish-selection]

Questions regarding finish selection for a project.

Filter by
Sorted by
Tagged with
7
votes
5answers
7k views

Finish that will come in contact with alcohol

I am just starting to get into finishing. I have a pallet wine rack that will be holding wine bottles (obviously). On top of this I have several other wine related wood projects I am making. I have ...
6
votes
4answers
10k views

Shellac over paint, outdoors

I am making something for outdoor use and I've painted it with a matte exterior latex paint. I'm satisfied with the protection that the paint will offer but I'm experimenting with ways to make it look ...
2
votes
2answers
420 views

Finishing California redwood for a bed frame?

I'm looking at what finish would be best for a redwood bed frame. I would like the wood to look natural, warmish color, and a bit of a satiny feel. I've done a few trials and here is where I stand (...
2
votes
2answers
135 views

Sealing a Stained Poplar Bed Frame

I'm putting together a KD Frames poplar bed frame. I've already stained it with Minwax Wood Stain (I really wanted a black wooden look) but I'm unsure how to finish it. When I bought the stain at ...
1
vote
1answer
63 views

Would different finishing schedules inside and out spell doom for a bathroom cabinet?

For a little while now, I've been thinking about making a cabinet (or something) with a finely painted exterior, but a natural finish on the inside, so that there's a little hidden gem when someone ...
0
votes
2answers
96 views

Recommended finish for workbench vise

I made a small tabletop Moxon vise and after some research decided to finish it using a 3-part mix of equal parts polyurethane, boiled linseed oil, and mineral spirits. Sounds okay to me, but I'd like ...
10
votes
7answers
43k views

What is the best finish for wood in a bathroom

I have nearly finished making a small table which will be placed in a bathroom. I am concerned about protecting the wood in a humid/damp environment. The bathroom can get quite humid while people are ...
7
votes
1answer
2k views

Epoxy resin and wood movement

I am considering putting an epoxy resin finish on a table top for a nice thick and smooth finish (it will cover the side edges as well). Will there still be wood movement after the epoxy has cured? ...
7
votes
2answers
18k views

How can I prevent outdoor cedar projects from losing their color?

I love the look of natural cedar for outdoor projects. I built a small garden fence a few years ago, and made the mistake of leaving it unfinished. It's completely gray/silver now. I'm planning on ...
1
vote
1answer
88 views

Matching a cheap yellow finish on oak

Is there a method for matching an unknown finish on an existing piece of wood? In my case, I have an old (but nowhere near antique) piece that has had a couple trim pieces fall off. I've managed to ...
4
votes
2answers
406 views

Oil based stain over water based fire retardant

I'd like to treat some wood (raw pine) with a water-based class A flame retardant (Flameseal WSA), but also stain it with an oil based stain (garden variety Minwax or Varathane). I'm a bit unsure of ...
1
vote
0answers
36 views

Tabletop offcut for cutting board, finishing

I bought a Gerton top for a desk and it is great. I bought a second one and made some shelves from that. I am very happy with this product. My question is, I have some material left and would like ...
3
votes
0answers
85 views

Cigarette-proofing outdoor furniture

I built some benches, they're pressure treated lumber currently finished with oil based stain and oil based satin finish spar urethane. Some of them have shellac between the stain and urethane because ...
2
votes
0answers
96 views

Wooden desk, finish against urine

I'm repairing a used desk made from black carob (it's harder than white oak to give an idea) which only had a wood wax finish. It's been damaged all around its base by dog urine. The old owner of the ...
4
votes
1answer
85 views

Is Rubio Monocoat appropriate on red oak furniture?

I am making a bunk bed out of 8/4 red oak. It has very open grain/pores in some places and I'm concerned about my finish process. I'm basing my design on plans from the Wood Whisperer. He finished ...
1
vote
1answer
141 views

Water-borne finish on red oak and want the natural red colour you get using oil finish

I will be using a water-borne finish on red oak and want the natural red colour you get when using an oil finish. How can I achieve this?
4
votes
2answers
79 views

Suggestions for finishing a pine/mahogany sword

I just finished shaping a sword out of some pine and mahogany scraps I had lying around. I like how it turned out, so I want to finish the bare wood in a way that will enhance its appearance and ...
10
votes
4answers
2k views

What is a good finish for shot glasses?

I recently got a lathe and playing around with it I've made some cups roughly the size of a shot glass. My cousin immediately wanted to buy them off me. I haven't found any information that seems ...
3
votes
2answers
88 views

What glaze or surface treatment to repair this bar?

I have a bar that has a corner that was damaged in a move: It seems as if the wood underneath the finish is MDF. But, how do I identify what the finish is that was used here, so that I can identify ...
4
votes
2answers
86 views

Stabilizer or hardener for handmade wooden canes

I have been using a wood hardener and so far that has been working. Should I be using a stabilizer instead? More generally put: when fabricating a walking stick or walking cane what is the best ...
5
votes
1answer
91 views

What would be a suitable finish for a board game

I'm making a board game with blocks, both made of thin plywood. I don't know what type of wood it is; (it is light in colour and weight and rather soft) I would like to coat the wood eventually (which ...
5
votes
3answers
7k views

Using raw beeswax for cutting board finish

I am finishing up an end-grain butcher block cutting board (my first attempt) for my parents Christmas gift. Thus far I've finished it with mineral oil that I've been soaking into the pores. My last ...
2
votes
1answer
78 views

Recommended finish to preserve older marquetry artwork

I can be convinced that this is a duplicate of this other Q&A, but there isn't much there that seems to pertain to preservation of already well-dried wood art pieces. But I'll go along with what ...
2
votes
1answer
133 views

Most durable foodsafe finish to highlight chatoyancy

My favorite lumberyard (where I get most of my bowl blanks) specializes in curly/fiddleback/birdseye maple, all of which I love for their holographic/chatoyant qualities. Because I'm a beginner, I've ...
3
votes
1answer
17k views

Sealer and Clear Top-Coat for wooden sign/art

Two questions: 1) What Base-Coat do you recommend 2) What Cristal Clear top coat do you recommend Background: I was at a craft show, and a guy that made wood signs for outdoor patios was there. He ...
4
votes
1answer
324 views

Epoxy bar top finish over boiled linseed oil

I made bar top out of reclaimed redwood (planed and edged to clean wood) which I edged with stained white ash. I intented to apply bar top epoxy. I was using boiled linseed oil on other projects and ...
0
votes
0answers
93 views

For how much time are fumes from freshly polished wood furniture toxic and must be aired out & presence avoided?

PS: If needs to be in the DIY SE rather than Woodwork SE please moderators figure where it will get better responses and fit. Thanks. PPS: Found this similar - https://diy.stackexchange.com/...
1
vote
1answer
221 views

Choice of sanding sealer to avoid blotching (shellac vs cellulose)

I am working on a table that is made out of maple. I would like to apply a stain but maple is a timber that is prone to blotching so am considering using a sanding sealer before staining to reduce the ...
0
votes
1answer
81 views

Finishing Red Cedar Tabletop

I'm currently in the process of building a red cedar tabletop with laminated live edge slabs. Thickness should be around 7/4. However, I'm unsure what to use for finishing it. Given the wood is so ...
3
votes
1answer
148 views

Can I protect a french polished finish with laquer?

I am making a dining table out of walnut which is highly figured. What is the best finish so that the table can be used? I know French Polishing it will really enhance the timber but it seems so ...
1
vote
1answer
124 views

Sealing and reinforcing particle board

I am making some picture frames from an old table. The table top is oak slats on top of particle board. I’ve sliced the table and trimmed the slices with walnut, and cut rabbets in the frames. Like ...
4
votes
2answers
283 views

What is the best finish for a laser etching on birch veneer plywood?

I've done an etching on Birch veneer plywood for a piece of wall art and am trying to figure out the best way to finish it. It's a 24" x 24" Aztec Calendar design with a lot of intricacies. The guy ...
4
votes
1answer
13k views

Can I use lacquer over an epoxy resin?

I put an epoxy resin on a table top and it looks awesome except for a few spots that bubbled or had dust fall on it. I would like to sand the top down smooth/level and put a thin layer of lacquer on ...
1
vote
1answer
43 views

How can I finish this to protect it from the elements?

I made this sign by gluing numbers made of birch bark to another piece of bark: This is for outdoor use where it freezes hard. The numbers are about 1/8 of an inch thick, and water will collect in ...
2
votes
1answer
901 views

Finishing beech for minimal color change, matte finish

I'm trying to make a desktop out of beech wood (Ikea Gerton table top) and want the wood finish to look like this example photo... A very light natural, matte look. How could I achieve this while ...
1
vote
1answer
795 views

Finishing/Buffing/Polishing Redwood Slab with Oil-based Varnish thinned with Danish Oil

I have a 3x5 ft Redwood slab with 1 coat of varnish/danish oil (50/50) mixture and 1 coat (last applied) of just varnish. I applied fairly thick coats for both layers. The varnish The Danish oil I ...
1
vote
0answers
448 views

What finish should I use on wooden jewellery?

So, I'm carving a wooden pendant for my girlfriend. I want the finish to be satin. However, since she plans on wearing it all the time, I want it to be water resistant. I do not want the wood to get ...
3
votes
1answer
159 views

How to cover the top and bottom of a piece with a self-leveling epoxy resin?

Is there a good way to cover both the top and bottom of a piece with a self-leveling epoxy resin? I have a small box/basket that I'd like to have in my kitchen to hold cooking oils. Since the ...
2
votes
1answer
42 views

Oak veneer finishing

I just brought an oak veneer to decorate my apartment. (picture 1) However the colour is too white and I want to make it a little bit yellow as in the next picture. What would be the right wood ...
3
votes
1answer
40 views

Can the finish be different on joined pieces

I'm making a table utilizing plywood as legs and solid ash wood as a tabletop. I plan on lacquering plywood and oiling the tabletop. 1) Should I be wary of oil interacting with lacquer at join line? ...
1
vote
1answer
2k views

How should I polish and finish this table top stained with Minwax Polyshades?

I built a dining tabletop out of pine and stained it three times with Minwax Polyshades Pecan and a fourth time with Minwax Polyshades Espresso. The fourth coat was just to get the rough looking ...
2
votes
1answer
1k views

finish for a very large pine dining table — is beeswax crazy?

I am an enthusiastic but novice wood worker, and this is my first large project. The table is made of pine boards (and possibly some fir? I've been doing several projects lately and I'm not 100% sure ...
1
vote
1answer
107 views

Filling Lines After Pyrography

I was wondering what type of filler I should use to obtain a clear coat that will fill the indents obtained after burning wood (see image attached) such that the two surfaces are flat (I'll probably ...
7
votes
0answers
801 views

What are the hardness ratings for the different types of lacquers and polyurethanes?

I have read a lot of opinions online about the hardness of different finishes, but I cannot find any authoritative numbers for hardness ratings for the different types of finishes in the lacquer and ...
1
vote
1answer
480 views

What is a good non-yellowing finish for maple?

I am in the process of building a bench for indoor use out of hard maple. It will only get indirect sun when it is complete. This is my first project with this light of a wood (I've worked primarily ...
9
votes
1answer
4k views

What finish is suitable for a childrens toy?

I'm designing a children's toy and I need it to have a non toxic, water resistant finish that can withstand being put in mouths, being thrown around and that is easy to clean.
4
votes
1answer
460 views

Working with Wenge or Purpleheart

I'm looking into creating a jewelry box for a ring and I am trying to decide on which wood to use. I am stuck between either using Wenge or Purpleheart, I have heard that Wenge can cause an allergic ...
1
vote
1answer
190 views

How can I protect my teak table while maintaining its raw and unfinished look?

I have an outdoor teak table that I want to be protected against the weather without altering the way it looks too much. I put clear spar urethane on my chairs and was unhappy because they ended up ...
1
vote
2answers
119 views

Shelf building questions from a newbie

Good day all I want to start building a wooden "shelf" of sorts, the problem is that I have literally no experience. So I have been looking at a bunch of youtube tutorials and asking my stepdad for ...
3
votes
1answer
188 views

Finish for pine plywood art piece

I'm an artist new to wood burning (pyrographics) and I just finished a female nude on pine plywood.I would like to add a finish to the figure (not the background) as a subtle emphasis. But I don't ...