Is there an advantage or reason for them to feed in the opposite direction to jointers, router tables, and spindle sanders?

  • Just a guess but it might be merely to do with convention. It's possible the earliest bandsaws (or the brand/model that became the default bandsaw early on during their establishment in workshops) just happened to be designed to feed from the left. So possible parallels with the rise to dominance of QWERTY keyboards.
    – Graphus
    Commented Mar 17, 2018 at 12:05
  • They aren't all "right handed" though most have been. The bandsaw on my Crescent Universal Woodworker is "left handed" and it is a little strange because it is different from the norm. I don't know that there is any reason. Ideally the bandsaw would have infinite throat and it wouldn't matter.
    – Chuck S
    Commented Mar 17, 2018 at 14:05

1 Answer 1


The structural reason is based on the orientation of the blade guides, specifically the thrust bearings. The blade's teeth cannot be facing the thrust bearings, or they would have no effect. Therefore, the blade is installed with the teeth facing away from the thrust bearings, and this determines the direction in which the material is fed (into the teeth, of course), which is left to right, because all band saws have the thrust bearings to the right of the guide bearings or guide blocks.

I can only guess at the reason for THIS (the placement of the guides, which ultimately determines feed direction), but I believe that it might have to do with the majority of users being right handed, making it a desirable orientation because the right hand (more dexterous hand) steers while the left hand pushes, and keeping the right hand farther out of harm's way - to one side of the blade rather than in front of the teeth.

  • "Left hand pushes" is the opposite of most other tools. Commented Apr 2, 2018 at 19:37
  • I'm accepting this answer for lack of a more authoritative answer. It may be that no good reason exists. Commented Apr 2, 2018 at 19:39

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.