I have made a curved top for a letterbox by mitering and gluing the edges of narrow pieces. I've then used my spokeshave and sandpaper to get a smooth outside surface. I intended to smooth the inside using my round card scraper but have realized it's not really practical to take that amount of material off with a scraper.

Curved Surface

There is a similar question here. My question differs in two ways. Firstly, I'm not asking specifically about 'old school' techniques. If someone has a way of doing it with a router then I'm all ears. Secondly, the suggestion of using a compass plane in the accepted answer wouldn't work for me as the curve is too tight and I would be planing against the grain. A scorp would probably be perfect for this but unfortunately I don't have one and would prefer not to get one for a single project.

Any other ideas for how to get it smooth?

  • I guess that depends on how curved/accessible the surface is, a picture of the piece would help to get better answers.
    – Stoppal
    Aug 2, 2016 at 6:35
  • Possible duplicate of What is the old-school way of smoothing a curved surface?
    – Graphus
    Aug 2, 2016 at 7:29
  • 1
    You have this tagged hand-planing. This dupe would work well with that. This question would not be a dupe so long as you specifically look for power tool answers. Feel free to remove my edits if you would like.
    – Matt
    Aug 2, 2016 at 12:06
  • 1
    @Graphus yep :-) I noticed this old question and the addition by someone else of the powertools tag and addition to the title annoyed me as it was misleading. So just a peace-of-mind edit!
    – sprinter
    May 9, 2021 at 22:58
  • 1
    So, five years on (yikes, where does the time go?!) do you recall how you got this done?
    – Graphus
    May 10, 2021 at 9:06

1 Answer 1


This may or may not be a duplicate. I think the best solutions were already covered in the "possible duplicate candidate". I'd go for a thick scraper.

The only other things i can think of from the top of my head that use power tools are:

Flap Sanders

Image from Instructables

There is an Instructable (picture is taken from there) and John Heisz has a pretty good video about it. That may be worth your while as it's not only usable with this particular project.

Handheld Spindle Sander

Izzy Swan has a video about making those yourself for a couple of bucks and I think those could work for you as well. Start with a pretty rough one(~ 60 grit) and progress to however fine you want it.

A Round Surform

I think surform is a term created by Stanley and I myself only own a plain old plane one (there might be a pun in there somewhere). They are available in round and half-round as well and this might be an option to pursue as they are not too expensive and are quite versatile. (Basically those surforms are bigger, fancier, lightweight files that pack quite a bite)

  • 1
    Handheld spindle sander is a great idea. Will definitely give that a go. Thanks.
    – sprinter
    Aug 2, 2016 at 12:31
  • The flap sander reminded me of an angle grinder disc: amazon.com/Angle-Grinder-Flap-Discs-Flat/dp/B0089F2OJI (not a recommendation -- just the first one that jumped out in search...) If you don't already have an angle grinder, consider one. They're super-useful. (Although somewhat dangerous!) Aug 3, 2016 at 2:02

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.