0

Background

I would like to buy a dado stack, but 30mm is hard to come buy due to laws forbidding selling them in Europe. Using them for personal use is ok, so I can order from abroad.

Question

I have a Dewalt DW7492 table saw with a "30mm" arbor, but it is 14mm (9/16") wide and 30mm (1") long. It uses a flange washer that centers the 30mm ID blade on the shaft.

blade with flange

arbor width

arbor length

I suspect this is the same arbor as North American models with a different flange.

Can anyone support this theory? Is there anything I should be weary of trying to do this?

Update about the law

This law appears to have gone in effect in 2012. You can find links to the EU directive here, which is defined in Article 12.3 based on this ISO standard.

9
  • 1
    Normal North American arbors are 5/8". If it was me, I'd doublecheck yours with calipers. – Aloysius Defenestrate Oct 20 '20 at 19:52
  • Thanks. I'll do that. How much tolerance would you think to be acceptable? – ryanjdillon Oct 21 '20 at 6:21
  • From this thread on Fine Woodworking, an alleged machinest says 0.001-0.000, which mean I would need a bushing if my arbor is indeed 14mm. finewoodworking.com/forum/changing-arbor-hole-size-on-saw-blade – ryanjdillon Oct 21 '20 at 6:29
  • Totally OT, but why in the world is a 30mm dado stack illegal to sell in Europe??? – FreeMan Oct 22 '20 at 11:04
  • One saw blade? Fine. Put two or more in a room together and you're asking for trouble. – cchoe1 Oct 28 '20 at 17:25
3

I decided to go out on a limb and buy a stack to know for sure, and...

It fits! There is a verry small amount of play before tightened, but any less and the blades would scrape over the arbor. I believe this is a proper 5/8" arbor.

I do not know about other manufacturer's arbor dimensions, but if you have a DeWalt, you may be in luck.

If you are interested in dados and buying a contractor saw in Europe, in addition to the arbor diameter the DWSE942 also has a long enough arbor to support the full blade/chipper stack with some (not all) of the spacers provided in the Freud 6" Pro Dado Set.enter image description here

2

The short answer is "no," but I'll elaborate.

The dimensions are very critical in this area since small variances at the arbor can have huge effects at the edge of the blade. Also the motor spindle could have been treated differently for the euro model and it could bend or break.

If the arbor is even a small fraction oversized, the blade won't fit. If the arbor is a fraction too small it would potentially induce a variance in the blade height that could (in theory) cause the blade to bite into the wood and send it back in your direction(kickback) or in the best case just give a very poor quality cut.

There are companies that will sell you a dado set with any sized hole you want for a very small fee for the 30mm size. I can give you my favorite, but send me a private message for that.

3
  • 2
    SE has a PM feature now? Where??? How??? It is OK (especially here at WW, it seems) to make specific product recommendations in answers so long as you indicate your affiliation (or lack thereof) with the mfgr/retailer. It's not OK, however, to ask for product recommendations. "Companies like ABC Corp (I'm a fan of their high quality products) can sell you a dado set with any size arbor you'd like. I think their prices are quite reasonable." or "I work for PDQ Co and we can sell you exactly what you're after." - including links is optional – FreeMan Oct 22 '20 at 11:10
  • 2
    Well, if it's not against the rules, then the company is Ridge Carbide. I'm not affiliated with them in any way, but I do use their blades on every saw they make a product for. – Mr. Mascaro Oct 22 '20 at 12:12
  • I haven't updated the question yet, but after going to measure the arbor a second time with calipers, I found that the arbor is ground on two sides to allow the flange to groove onto it. Measuring from the outside rounded edge, it appears to be 5/8". I'd find it strange if Dewalt made its European arbor only slightly off from 5/8, intended for 30mm blades... seems asking for somebody to try this and have problems, like me :) – ryanjdillon Oct 22 '20 at 12:58

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.