While planning and designing a cabinet, I made a wrong assumption of making two butt joints J1 and J2 on the same side of a piece of wood. While doing the work, I realised J1 needs screws from bottom to top, and J2 needs screws from top to bottom, and if I do either one first, the other is not possible. I'm thinking one of the joints needs to be done using pocket hole screws. All pieces are 3/4" hardwood. Is there a better alternative? How do I salvage this?
|(1) | |(J1) ==============(2) |(J2) | | |(3)
Side view -
Front View -