0

Super novice question!

The blade speed at the points is the same regardless. Only the angle of attack changes. What are the pros and cons? I'd like to minimize chip out most of all since I'm working with very crappy material (plywood and melamine-faced chipboard).

blade depth

I am also interested if it's the same for other power saws.

| improve this question | |
  • 1
    The safest is with the minimum exposed blade. – Monte Glover Oct 16 '19 at 0:50
  • 1
    "I'd like to minimize chip out most of all" On one or both faces? Crosscutting or ripping or both? What type of blade is fitted? (Most saws come with a combination blade, usually not a great one, and they tend to cut fast but leave ragged sawn faces and torn edges.) Last but not least, "very crappy material" doesn't really tell us enough, could you specify? – Graphus Oct 16 '19 at 6:23
  • plywood and chipboard with melamine no idea about my blade. i will have to check later today – Wes Oct 16 '19 at 10:06
  • 2
    @Wes on plywood and chipboard, I use a Diablo plywood blade. It works really nice. – vincentw56 Oct 16 '19 at 14:33
  • 2
    The angle of attack is not the only thing that changes. The amount of time each tooth is contacting the wood also changes. Exposing just the minimum amount of blade to cut through can contribute to burning and is not as efficient due to the gullets clogging and increased friction. I've heard recommendations to expose either a whole tooth or the whole gullet. – SaSSafraS1232 Oct 16 '19 at 16:24

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.