5

I'm interested in creating two types of bowls. The first is relatively straightforward - in design, at least - as it will just be a large salad bowl. The second is going to mimic a bowl I was gifted recently that is more or less tear drop shaped.

My question is: how I would go about removing the inside (and outside for that matter) of the bowl? Would this process be the same for a bowl that is not circular?

Bear in mind that you're speaking to a beginner here. If possible, please provide the investment context, ie what are the low tech (cheap) and hi tech (expensive) tool options?

Improve this question
9
  • are you asking about turning or carving?
    – bowlturner ♦
    Commented Mar 18, 2015 at 1:04
  • 1
    Yes. Turning = lathe carving is more hand work. I turn bowels, I don't carve
    – bowlturner ♦
    Commented Mar 18, 2015 at 2:52
  • 1
    Yes, there are 2 ways that I know of, both use special chucks for the lathe
    – bowlturner ♦
    Commented Mar 18, 2015 at 12:25
  • 2
    OR....turn green wood and allow it to recurve as it slowly dries. That is certainly asymmetrical!
    – BrownRedHawk
    Commented Mar 18, 2015 at 12:26
  • 1
    @bowlturner - Can you provide a little more info about your last comment as an answer. That seems to be what I'm looking for. Then, I can mark it as the accepted answer. Thanks
    – fordareh
    Commented Mar 18, 2015 at 13:55

2 Answers 2

Reset to default
4

To turn an a bowl that is not round I am aware of 2 (3 counting BrownRedHawks comment!).

The first is to use an off-center jig, you will turn one half of the bowl, then change the jig and turn the other half, making an oval. The one I've linked to is for the Ruth Niles jig, it's fairly small, I've also seen some videos on making your own jig.

The other is an 'oval turning device' Not exactly sure how it works but I think it does all the work of moving it around. Here's a video of it in action.

And of course as BrownRedHawk pointed out, turning a bool green(ish) it will warp and be very asymmetrical. The biggest trick here to keep it from cracking is to make sure that the wood is a very even thickness all around (and still fairly thin), that way it dries at about the same rate and less likely to crack.

Improve this answer
2
  • I have same woodworking problem. Thanks for your help. Wood working is my winter pass time. I build most all my own furniture. These projects are gradually filling up an empty room.
    – user1396
    Commented Nov 13, 2015 at 7:34
  • 1
    Just a tip for turning green wood: I've successfully dried my bowls after turning by running it in the microwave. Works unlike an oven which dries the outside of the wood first. =)
    – Allman
    Commented Nov 13, 2015 at 9:29
0

You want to use a bowl carving adze: https://www.etsy.com/listing/190787274/curved-bowl-adze-big-curve-steel-4150?ref=related-0 or http://www.japanwoodworker.com/Product/05Z97/CURVED-CARVING-ADZ.aspx?gclid=CMeq__TRl8kCFdcRgQodt5QAkQ You work from the sides into the middle. The trick is getting your walls to be of an even thickness. Peter Follansbee has some great photos here: https://pfollansbee.wordpress.com/2015/07/02/bowl-carving-tools-and-video-update/

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.