14 events
when toggle format what by license comment
May 5 '16 at 21:24 answer user1457 timeline score: 0
Aug 26 '15 at 13:42 comment added BrownRedHawk Nice work with the sound effects! I was so confused at first
Aug 24 '15 at 16:59 answer Graphus timeline score: 2
Aug 24 '15 at 15:52 answer grfrazee timeline score: 11
Aug 24 '15 at 14:35 comment added Damon Did I mention I just bought myself a new router? :-)
Aug 24 '15 at 14:34 comment added Damon That definitively sounds like ffoooooooooooouuuuuuuuuuuuuiiiiiiiiiiiiiiii... a case for the router! You can do without a templete if you do the holes first. Do them a millimeter or two less than you need (you want the glass plate to "float" anyway). Then stick the rubber feet into the holes, with glue on top, drop the glass. Or better yet, you can fiiiiiiiiiiiiiiooouuuu the glass plate's contour into the side pieces, and do a small rabbet on the middle pieces (which should be pretty straightforward as they're small), so the glass completely drops into the wooden frame.
Aug 24 '15 at 12:51 comment added Matt @rob Updated with pictures. The glass will "float" above the table. I had no intention of using trim. I think if I did it would look silly since the table runners are not square.
Aug 24 '15 at 12:43 history edited Matt CC BY-SA 3.0
Pictures and some clarification.
Aug 24 '15 at 12:02 comment added Matt @keshlam I am inexperienced with routers so I was not sure. I assumed I would have to push into the work.
Aug 24 '15 at 9:35 answer LosManos timeline score: 1
Aug 24 '15 at 3:50 comment added rob Do you have a picture of what it looks like with the glass on top but without the feet and recesss? Will the feet lift the glass off the surface at all, or will the recesses be at least the depth of the feet? Have you considered holding the glass in place by insetting it or by adding trim around the edge instead, either flush or below the top surface, or by capturing the glass as in a picture frame?
Aug 24 '15 at 1:56 answer bowlturner timeline score: 6
Aug 24 '15 at 1:49 comment added keshlam You could use the router, guided by a template -- but first you'd need to make the template or find something which can serve that purpose.
Aug 24 '15 at 0:19 history asked Matt CC BY-SA 3.0