Woodworking

Student

 Student
First question with score of 1 or more.
Awarded 1980 times.
Yacht varnish to protect antique mahogany veneer? [bathroom vanity]
Awarded Nov 29 at 9:25
Glue mistake and redo
Awarded Nov 23 at 9:47
Flattening a maple woodblock by hand for fine art woodcut printing on a press
Awarded Nov 20 at 9:05
How to route smoothe, diagonal S-shape onto edge of wood board?
Awarded Nov 19 at 21:01
How to sharpen hand saw with grouped teeth
Awarded Nov 19 at 14:27
Veneer on 1 vs 2 sides of Baltic Birch ply?
Awarded Nov 19 at 1:57
Table top uneven stain [duplicate]
Awarded Nov 15 at 17:03
What is this vise or holder?
Awarded Nov 14 at 15:15
What causes the very dark brown and black color of some antique oak?
Awarded Nov 13 at 21:17
Are pocket-hole screws stronger than 90° screw joints for building these garage shelves?
Awarded Nov 13 at 15:36
Using white oak for underwater wall of pond - need to dry at all first or not?
Awarded Nov 13 at 1:09
Mixing a shellac cut?
Awarded Nov 4 at 1:55
Plywood Bunk Bed
Awarded Oct 30 at 7:48
Loft Bed Design - racking going to be a problem?
Awarded Oct 27 at 13:42
How to re-establish a uniform bevel on a plane iron (grinding or honing?)
Awarded Oct 27 at 7:18
How to fix failed attempt to remove spot on table?
Awarded Oct 24 at 7:50
Practical indicators that my surface is ready for another coat of Tung Oil
Awarded Oct 11 at 23:41
Adapting a 4-jaw drill chuck to hex shanks?
Awarded Oct 3 at 23:33
Extendable outdoor coffee/dining table. Will it be strong enough?
Awarded Oct 3 at 12:33
Can I hammer 25.4mm x 300mm oak dowels into a 25mm hole?
Awarded Oct 1 at 11:08
Not finding trim to match plans
Awarded Sep 30 at 13:56
How to repair a broken spindle in a French Country dining chair
Awarded Sep 25 at 17:51
What are they and how do I remove them? [closed]
Awarded Sep 19 at 16:07
How to remove a stripped screw thread from a wooden stool leg
Awarded Sep 18 at 18:56
How to position pocket hole jig for 35mm thick plank?
Awarded Sep 11 at 19:28
Should I stain/seal outdoor furniture before or after pre-drilling lots of pocket holes?
Awarded Sep 8 at 15:27
Advice for drilling dowel holes in a circle for an adjustable joint
Awarded Sep 3 at 14:57
Joints for a wall-mounted canopy
Awarded Aug 27 at 19:35
Green wood (for turning) and mold risk
Awarded Aug 23 at 14:27
How to keep a portable sawmill blade from jumping the roller guides
Awarded Aug 23 at 13:03
Staining/marking from clamps during glue up
Awarded Aug 19 at 8:00
How can I increase the resistance in an adjustable scissor-lift?
Awarded Aug 17 at 12:21
Are round corners costly?
Awarded Aug 7 at 22:25
Wide or narrow side between blade and fence in rip cut on table saw
Awarded Jul 28 at 19:26
Sealer for inside of bathroom cabinets [thin plywood]
Awarded Jul 25 at 18:25
Beveled edges on melamine MDF
Awarded Jul 23 at 23:36
Hiding brush stroke marks when applying shellac on mdf
Awarded Jul 22 at 4:21
Cutting a stack of paper into a shape with a router [closed]
Awarded Jul 20 at 19:57
workbench with lattice top
Awarded Jul 19 at 17:45
Flush Mount USBC Port In Wooden Desktop
Awarded Jul 16 at 3:10
Traditional keyed mitre joint or using through dowels
Awarded Jul 12 at 7:08
Dowel diameter reduction
Awarded Jul 11 at 23:11
furniture repair
Awarded Jul 10 at 23:25
Varnish peeling off dining table
Awarded Jul 4 at 18:52
Tension of twisted beams
Awarded Jul 2 at 18:40
Would a 2 Pass Dowel Glue Up For a Hung Door Be Stronger and Reduce the Fall
Awarded Jun 29 at 14:32
Is it bad practice not to pick up the plane as you pull back for another pass?
Awarded Jun 26 at 6:58
Treehouse plans call for a 4x10 beam. Can I sandwich a pair of 2x10 and secure them with glue and screws?
Awarded Jun 24 at 12:57
Side table design: will wood movement and expansion be an issue?
Awarded Jun 23 at 5:45
How flat should bench aprons be?
Awarded Jun 20 at 21:27
How can I repair the bent legs on my couch?
Awarded Jun 18 at 17:18
Stained wood is darker than expected after stripping + sanding + staining
Awarded Jun 17 at 17:33
Drawer face replacement help
Awarded Jun 10 at 0:12
Having a hard time ripping inexpensive 2x10 lumber. Could use a little advice
Awarded Jun 9 at 19:32
Is this a valid way to brace a garden gate?
Awarded May 25 at 17:15
Peeling floors polyurethane
Awarded May 23 at 4:25
Grain direction for ends of a wooden tool tote
Awarded May 22 at 15:35
Making a modern chaise on two cylinder legs stability issues
Awarded May 20 at 16:46
Forming 2x6 tongue & groove decking (with chamfers)
Awarded May 17 at 22:09
Resetting a slipped frame element in a frame-and-panel cabinet door
Awarded May 14 at 18:36
1
2 3 4 5
…
33

Your privacy

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.